Mix Spiral
MIX Spiral is an air tool agitator developed to efficiently agitate liquids such as ink and paint in a short time.
Insufficient agitation of ink causes problems such as foaming and accumulation at the bottom of the ink can. In addition, the high viscosity of ink is also a cause of increased ink costs, which is also considered a problem.
This air tool was developed to solve these problems by "agitating ink and keeping it in good condition" and "eliminating residual ink".
Standard Type (For mounting on Japanese ink cans)
- Overall length: 376mm
- Overall width: 253mm
- Weight: 1,160g
- No-load speed: 580rpm
- Air consumption: 0.058m3(Normal)/min
- Hose metal fitting size: RC 1/4
- Options: I-bracket, telescopic bracket, extension shaft
Standard type can be easily installed by fitting the bracket to the PP container.
As options, the shape of the bracket and the length of the shaft can be changed, so it can be used for containers of various shapes.
Square Can Type (for attaching to 5 gallons square can)
- Overall length: 515mm
- Overall width: 130mm
- Weight: 1,200g
- No-load speed: Standard type 580 rpm / High viscosity type 850 rpm
- Air consumption: 0.06m3(Normal)/min
- Air pressure: 0.6Mpa
- Hose metal fitting size: RC 1/4
- Option: Extension shaft
The square can type can be mounted with the holes in the container intact, so there is no worry about chips, etc. from the container mixing with the liquid, and it can agitate the liquid reliably. The speed of rotation can be selected according to the viscosity of the liquid.
As an option, the length of the shaft can be changed, so it can be used for containers of various shapes.
Related Links
Oxel® Lemon Fine EX
Aerosol type cleaner ideal for the heating platen, adhesives, plastic sleeves, inks, and grease.
